Menu
r8_r11_resistors

GHD Resistors: R8 and R11

0

In GHD hair straighteners, resistors play a crucial role in controlling electrical current and ensuring smooth operation. Two specific resistors, R8 and R11, are vital components that maintain proper functionality and safety.

What are R8 and R11 Resistors?

ghd resistor

Resistors R8 and R11 in GHD straighteners help regulate the flow of electricity to the heating elements. These resistors control the current, ensuring the straightener heats up efficiently and maintains a consistent temperature. By managing the electrical flow, R8 and R11 contribute to the longevity and performance of the appliance.

Why Do Resistors Fail?

Several factors can lead to resistor failure in GHD hair straighteners:

  1. Overheating: Excessive heat can cause resistors to break down over time, leading to malfunction. If a resistor overheats, it may burn out and stop conducting electricity.
  2. Voltage Spikes: Sudden increases in voltage can stress resistors beyond their capacity. This can cause them to fail, disrupting the normal operation of the straightener.
  3. Wear and Tear: Like any component, resistors experience wear and tear over time. Continuous use can degrade their performance, making them less effective at regulating current.
  4. Manufacturing Defects: Occasionally, manufacturing defects can lead to premature resistor failure. These defects might be due to poor materials or assembly issues.

Replacing Resistors: Why Use Higher Power Rated Resistors?

When resistors like R8 and R11 fail, replacing them with higher power-rated resistors is a common practice. Here’s why:

  1. Increased Durability: Higher power-rated resistors can handle more electrical current without overheating. This makes them more durable and less prone to failure.
  2. Improved Heat Dissipation: Resistors with higher power ratings can dissipate heat more effectively. This reduces the risk of overheating and enhances the overall reliability of the GHD.
  3. Enhanced Performance: Using resistors with higher power ratings can help maintain the consistent performance of the hair straightener. They ensure that the device operates at its optimal temperature without fluctuations.
  4. Safety Considerations: By preventing overheating, higher power-rated resistors improve safety. They reduce the risk of damage to the straightener’s internal components and help avoid potential hazards like electrical fires.

When to Replace GHD Resistors?

If you notice your GHD hair straightener isn’t heating up properly, or if it shows signs of malfunction, the resistors might need replacement. Consulting a professional for diagnosis and repair is advisable to ensure the correct components are used. Regular maintenance checks can also help identify issues early, preventing potential damage.

Conclusion

In GHD hair straighteners, resistors R8 and R11 are essential for efficient and safe operation. Understanding why resistors fail and the benefits of using higher power-rated replacements can help maintain your straightener’s performance and longevity. By opting for more robust components, users can enjoy reliable styling tools that deliver consistent results without compromising safety.

20240627_190539

What is a GHD thermal fuse

0

A thermal fuse is a small safety device installed in electrical appliances, including GHD hair straighteners. Unlike regular fuses, which protect against electrical overload, a thermal fuse protects against overheating. It is a one-time-use component that automatically cuts off the electrical circuit when the appliance reaches or passes a certain temperature.

Why is a Thermal Fuse Important?

The thermal fuse acts as a safeguard in your GHD hair straighteners. Its main purpose is to prevent them from overheating, which can cause damage or even pose a fire risk. If the internal temperature exceeds safe levels, the thermal fuse will melt, breaking the circuit and shutting off the device. This action prevents further heating and protects both the user and the appliance.

How Does It Benefit Your GHDs?

In GHD hair straighteners, the thermal fuse ensures optimal performance and longevity. It acts as a reliable safety feature that protects the internal components from heat damage. This not only extends the lifespan of the straightener but also maintains its performance. Additionally, it provides peace of mind, knowing that the appliance will automatically shut off if it gets too hot.

When Should You Replace a Thermal Fuse?

If your GHD hair straightener suddenly stops working and does not turn on, a blown thermal fuse might be the cause. Since thermal fuses are single-use, they need replacement if they trip. It’s important to use a correctly rated part and, if possible, consult a professional for the repair (book a repair here) or read our article how to replace this yourself.

Conclusion

Thermal fuses play a vital role in the safe operation of hair straighteners. They act as a protective measure against overheating, ensuring safety and durability. By understanding the function of a thermal fuse, users can better appreciate their importance and ensure that their GHDs remain in excellent working condition. Regular checks and timely replacements of the thermal fuse can help maintain the performance and safety of your hair styling tools.

GHD hair straighteners beeping

0

The Beeping Problem with GHD Hair Straighteners: How We Can Help

GHD hair straighteners are a popular choice for achieving sleek, smooth hair. However, a common issue that many users encounter is the annoying beeping sound that indicates a malfunction. This beeping is often caused by a problem with a resistor on the circuit board. While it might be tempting to fix this issue yourself, it’s important to understand the complexities involved.

Understanding the Problem
The beeping sound in GHD hair straighteners typically points to an issue with a specific resistor on the circuit board. Resistors are crucial components in any electronic device, and a faulty one can disrupt the entire functionality of your straighteners. The malfunctioning resistor often needs to be replaced to stop the beeping and restore the straighteners to working order.

DIY Repairs: Proceed with Caution
Many users attempt to repair their GHD hair straighteners themselves. While this might seem like a cost-effective solution, it requires a significant amount of electrical knowledge and the right tools. You would need a soldering iron and a correctly rated resistor. Incorrect handling can not only damage the straighteners further but also pose a safety risk. Therefore, unless you are confident and experienced in handling electronic repairs, it’s advisable to seek professional help.

How WeFixGhds Can Help
At WeFixGhds, we specialise in repairing GHD hair straighteners. Our team of experts has the necessary skills and equipment to handle these repairs safely and efficiently. Whether you choose to bring your straighteners to our service centre or post them to us, we ensure a quick turnaround and a reliable fix.

Why Choose Us?
Expertise: Our technicians are trained to handle a variety of issues with GHD hair straighteners, including the beeping problem.
Safety: We follow strict safety protocols to ensure that your device is repaired without any risk to you or your property.
Convenience: You can either visit our service centre or send your straighteners by post. We strive to provide a hassle-free experience.
Quality Parts: We use high-quality, correctly rated resistors to ensure the longevity of the repair.
Don’t let a beeping sound ruin your hairstyling routine. Trust the experts at WeFixGhds to restore your GHD hair straighteners to their optimal performance. Contact us today for more information or to arrange a repair.

To have us repair your GHDs, please us this booking form

Replacing the Thermal Fuse in Your ghd Hair Straightener​

0

Replacing the Thermal Fuse in Your ghd Hair Straightener

Introduction:

The ghd hair straightener is a popular styling tool, but like any electronic device, it can experience technical issues. One common problem is the failure of the thermal fuse. Replacing the thermal fuse is a delicate process, but it can be done at home with the right tools and a bit of patience. This guide will walk you through the steps.

Safety First:
Before you begin, ensure your safety. Unplug the straightener and allow it to cool down completely. Work in a well-lit, uncluttered area. Remember, dealing with electronic devices involves risks, so if you’re not confident in your ability to perform these repairs, consider seeking professional help.

Tools You’ll Need:

  • A new thermal fuse compatible with your ghd model.
  • A set of small screwdrivers.
  • A pair of tweezers or needle-nose pliers.
  • Heatproof tape.

Step-by-Step Guide:

  1. Open the Straightener: Start by removing the screws that hold the straightener together. This will vary depending on your ghd model, so refer to the user manual or online guides for specific instructions.

  2. Locate the Thermal Fuse: Once open, locate the thermal fuse. It’s typically a square ceramic component connected to the switch side heater plate.

  3. Remove the Old Fuse: Carefully remove the old fuse. Be gentle to avoid damaging the wiring or other components.

  4. Install the New Fuse: Take your new thermal fuse and insert the wires from the screws you removed the old one. Ensure the connections are secure and there are no loose wires.

  5.  

  6. Reassemble the Straightener: Carefully put the straightener back together, ensuring that no wires are pinched or components misaligned. Screw everything back into place.

  7. Test Your Straightener: After reassembly, plug in the straightener and test it to make sure it heats up properly. If it doesn’t work, or if you notice any unusual behavior, unplug it immediately and consult a professional. like ourselves

Conclusion:
Replacing the thermal fuse in your ghd hair straightener can restore its functionality, saving you the cost of buying a new one. However, remember that working with electrical components can be risky. If you’re not confident in your ability to safely carry out these steps, or if the problem persists, it’s best to seek professional assistance.

Please note, this article is intended for informational purposes and does not substitute for professional advice. Handling electronic devices can be hazardous, and improper handling can lead to damage or injury.

Troubleshooting Common Issues of ghd Hair Straighteners

0

Troubleshooting Common Issues ofghd Hair Straighteners

Introduction

ghd hair straighteners are renowned for their quality and durability. However, like all electronic devices, they can occasionally encounter problems. Understanding how to diagnose common faults can help you determine whether a professional repair or replacement is needed. Here’s a guide to troubleshooting some common issues.

GHD straighteners do not heat up

  • Check the Power Source: Ensure that the straighteners are plugged in properly and that the electrical outlet is working.
  • Inspect the Cord: Look for any signs of damage to the cord, such as fraying or kinks, which could indicate a wiring issue.
  • Internal Faults: If there are no visible issues and the device still doesn’t heat up, it could be an internal fault like a broken heating element.

GHD straighteners overheat

  • Faulty Thermostat: This could indicate a problem with the thermostat, which regulates the temperature. Generally this would cause the internal thermal fuse to blow, but in some cases, ghds can overheat and operate higher than the optimal temperate without blowing the safety fuse. A suitable thermometer with a range of over 250 deg C can be used, optimal temperature of the closed plates should be around 180 deg C. Professional servicing is recommended to resolve these issues, contact us for details.

The Straighteners do not heat up enough

One plate failed:

    •  Check to see if one of the plates is not heating, often one plate can fail leading to an overall temperature decrease. Generally, the design of ghds mean that if htey operate with one plate only, it will be the switch side plate that fails. The heater plate will require replacing.

Both plates warm:

    This could indicate a faulty thermostat if the temperature is below optimum temperature. This will need checking and or replacing.

Unusual noise or smell

 

  • Electrical Issues: Any buzzing sounds or burning smells are indicative of serious electrical problems. Unplug the straighteners immediately and consult a professional. 
  • Remember, attempting to repair electrical appliances on your own can be dangerous and might void any warranty on your device. It’s always safer to consult with a certified technician or the manufacturer for repairs

Essential Care Tips for Your ghd Hair Straighteners

0

Essential Care Tips for Your ghd Hair Straighteners

Introduction

ghd hair straighteners have become a staple in many beauty routines across the globe. Known for their quality and performance, these straighteners can last for years with proper care. Below are essential tips to ensure your ghd hair straighteners stay in top condition, providing you with sleek, smooth hairstyles every time.

Cleaning

Regular cleaning is crucial. Ensure the straightener is unplugged and completely cool. Use a slightly damp cloth to gently wipe down the plates. Avoid using harsh chemicals or abrasive materials which could damage the plates. A soft cloth can remove product residue and buildup.

Storage

After use, allow your ghd straighteners to cool down completely before storing them. It’s advisable to store them in a heat-resistant pouch or mat. Avoid wrapping the cord around the straightener as this can cause damage to the wires. Instead, loosely coil the cord next to the straightener.

Avoid Moisture

Always ensure your hair is completely dry before using the straighteners. Using them on damp hair can cause both damage to your hair and the straightener. Also, avoid using straighteners in a humid environment to protect the electronic components.

Handling and usage

Be gentle when using your ghd straighteners. Avoid dropping them as this can damage the ceramic plates or internal components. Also, ensure not to clamp down too hard on the hair, as excessive pressure is unnecessary and can damage both your hair and the straightener.

Professional Servicing

 If your straighteners start to malfunction, do not attempt to repair them yourself. ghd hair straighteners should be serviced by professionals like ourselves, who can properly diagnose and repair any issues without compromising the safety and functionality of the device. 

Conclusion

Maintaining your ghd hair straighteners is simple but essential. By following these care tips, you can prolong the life of your straighteners and continue to achieve beautiful, sleek hairstyles. Remember, a little care goes a long way in ensuring the longevity and performance of your ghd hair styling tools.

Back To Top
wefixghds long ogo 400x125 1
--- Terms & Conditions

Contact

Phone: 01695 550066
Email: help@wefixghds.com
We operate Monday – Friday 9am – 5pm
 
WeFixGHDs
56 New Court Way, Ormskirk, Lancashire, L39 2YT

WeFixGHDs are not associated to Jemella Limited or any of it’s trademarks.